Resinoid Diamonds

The second stage of floor treatment is sanding, which is quick and easy with resinoid diamonds. The tools are applied by pull on the appropriate supports and offer excellent performance, making it easy to achieve high quality results. Depending on the type, they can be used dry or wet.

HP SERIES Our best-selling product, it guarantees excellent results on marble and concrete both dry and wet. It is available in grits 30/50/100/200/400: four passes are standard, but often three or even two are sufficient. Available diamonds: 100/120/140/200/223

HP HARD SERIES Specific line for wet and dry machining of particularly abrasive surfaces, characterised by low consumption. Available in diameters 100/120/140/200/223 and grits 30/50/100/200/400.

HP RING SERIES The ring shape increases the sharpness of the diamond and speeds up work. Available in 120 mm diameter and in grit sizes 50/100/200/400.

DF DA GRANITO SERIES High-performing, the new GRT series offers attractive performance on 'difficult' surfaces.

SIX COLUMN SERIES Specific line for dry cement processing, it is characterised by velcro attachment and dimensions of 60mm. Adaptable to all satellite machines, it is characterised by high performance and available in grits 30/50/100/200/500/800/1500/3000.

SPD/DGS SERIES FOR MARBLE A product that guarantees a high level of performance, the first steps (T00 - T0 - T1) are characterised by low consumption and optimum finishing for the subsequent steps (T2 - T3 - T4); 3 or 4 stages are usually sufficient, depending on machining requirements.

SPD/DGS SERIES FOR GRANITE The series consists of seven steps (SPD G0- G1 and DGS G1 - G2 - G3 - G4 - G5) for an excellent result

DOT SERIES Specific product for dry and wet cement work, available in diameters 60 and 75 mm and grit sizes 50 to 3000. Used on all satellite sanding machines.

HP PRISMATICO SERIES Our best-selling product, it guarantees excellent results on marble and concrete, both dry and wet. It is available in grits 30/50/100/200/400, with four standard passes, but often three or even two are sufficient.

HP PRISMATICO HARD SERIES Specific line for wet and dry machining of particularly abrasive surfaces, characterised by low consumption. Available in grits 30/50/100/200/400.

SPON TOOLS FOR POLISHING

For the final stage of the process, polishing, spon tools can be used before or instead of powder, arriving at the necessary grain size according to the degree of gloss desired. They allow faster work, better quality and lower cost.

SPON DISC These tools allow exceptional polishing with a very fast process and a very low cost; available in 400/800/1500/3000/6000/10000 grits and 52/100/120/140/200/223mm diameters. They can be used on any surface, both wet and dry.

PRISMATICO SPON these tools allow exceptional polishing with a very fast process and a very low cost; they can be used on any surface, both wet and dry, and are available in 400/800/1500/3000/6000/10000 grit.